Precautions
(4) If the gas gets in your eyes, rinse them immediately. If it has been inhaled, gargle with water immediately.
(5) When the polymer or gas of the polymer comes in contact with your skin, wash it off with soap and water.
(6) The electrolyte, separator paper, rubber and tube used in the FPCAP are all combustible. When the current value is
extraordinarily high during a short circuit, and assuming the worst possibility, the shorted-out section in the lead wire or
inside the capacitor could create a spark, and cause the resin or tube to catch fire.
Give due consideration to the capacitors mounting methods, mounting positions, pattern design etc.
5. Storage conditions
Do not store capacitors without load more than a year because of potential increased leakage current.
(1) Do not store at high temperatures and high humidity. Store it in a location that is not subject to direct sunlight and that has
low temperatures and humidity (generally, temperatures between 5 and 35oC and a relative humidity of 75% or less).
(SMD type VA/VB series : Temperatures between 5 and 30oC and a relative humidity of 70% or less)
(2) Storage period (SMD type VA/VB series)
Store in an aluminum laminated bag.
Before opening : 1 year
After opening : 1 week (Use up all the products after having opened out. Surplus products should be put into the aluminum
laminated bag, and seal up.)
(3) Baking conditions (SMD type VA/VB series)
When you use it exceeding a storage term, please carry out and use baking by the following conditions.
Temperature: 60(+0, -5) oC
Time: 168hours (only one time)
(4) Store in an airtight plastic bag to keep the leads in good condition.
(5) To keep the leads in good condition, store lead-type the FPCAP for no more than one year.
(6) Do not store in places where water, salt water or oil can directly fall on them, or places where condensation may form.
(7) Do not store in places filled with noxious gas (hydrogen sulfide, sulfurous acid, nitrous acid, chlorine, ammonia, etc.).
(8) Do not store in places exposed to ozone, ultraviolet rays and radiation.
6. Disposal
Please treat the FPCAP as industrial waste when needing to dispose of the FPCAP .
For details, refer to the Operating Precaution Guidelines for the EIAJ RCR-2367C. (Safety Application Guide for fixed
aluminum electrolytic capacitors for use in electronic equipment.)
No part of this publication shall be reproduced without prior written permission of the publisher.
NICHICON CORPORATION / FPCAP ELECTRONICS (SUZHOU) CO., LTD.
5
相关PDF资料
RS-483.3DZ/H3 CONV DC/DC 2W 18-72VIN +/-3.3V
RS3-483.3DZ/H3 CONV DC/DC 3W 20-60VIN +/-3.3V
RS61A151MCN1JT CAP ALUM 150UF 10V 20% RADIAL
RS80E122MDN1JT CAP ALUM 1200UF 2.5V 20% RADIAL
RS80G561MDNASQJT CAP ALUM 560UF 4V 20% RADIAL
RSL0E331MCN1GB CAP ALUM 330UF 2.5V 20% SMD
RSL1E150MCN1GB CAP ALUM 15UF 25V 20% SMD
RSO-4812DZ/H3 CONV DC/DC 1W DL +/-12V OUT SIP8
相关代理商/技术参数
RR71C331MDN1 功能描述:铝有机聚合物电容器 16V 330uF 7Mohms RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel
RR71C331MDN1XX 制造商:NICHICON 制造商全称:Nichicon corporation 功能描述:FUNCTIONAL POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
RR71C680MDN1 功能描述:铝有机聚合物电容器 16V 68uF 7Mohms RoHS:否 制造商:Panasonic Electronic Components 电容:470 uF 容差:20 % 电压额定值:2.5 V ESR:4.5 mOhms 工作温度范围:- 40 C to + 105 C 端接类型:SMD/SMT 外壳直径: 外壳长度:7.3 mm 外壳宽度:4.3 mm 外壳高度:1.9 mm 封装:Reel
RR71C680MDN1XX 制造商:NICHICON 制造商全称:Nichicon corporation 功能描述:FUNCTIONAL POLYMER ALUMINUM SOLID ELECTROLYTIC CAPACITORS
RR725CD 制造商:undefined 功能描述:
RR7260B3 制造商:RAPESCO 功能描述:STAPLER COMFORT
RR738 制造商:Simpson Electric 功能描述:MODEL 1329, RANGE 50-0-50DCMV, SCALE 800-0-800DCA
RR755 制造商:Jewell Instruments 功能描述:0-150VDC, SCALE 003RPM X 1000